extension shown: auto [x]

BusOrCoach

Defined in the auto.schema.org extension. (This is an initial exploratory release.)
Canonical URL: http://schema.org/BusOrCoach

Thing > Product > Vehicle > BusOrCoach

A bus (also omnibus or autobus) is a road vehicle designed to carry passengers. Coaches are luxury busses, usually in service for long distance travel.

Usage: Fewer than 10 domains
PropertyExpected TypeDescription
Properties from BusOrCoach
acrissCode Text The ACRISS Car Classification Code is a code used by many car rental companies, for classifying vehicles. ACRISS stands for Association of Car Rental Industry Systems and Standards.
roofLoad QuantitativeValue The permitted total weight of cargo and installations (e.g. a roof rack) on top of the vehicle.
Typical unit code(s): KGM for kilogram, LBR for pound
Note 1: You can indicate additional information in the name of the QuantitativeValue node.
Note 2: You may also link to a QualitativeValue node that provides additional information using valueReference.
Note 3: Note that you can use minValue and maxValue to indicate ranges.
Properties from Vehicle
accelerationTime QuantitativeValue The time needed to accelerate the vehicle from a given start velocity to a given target velocity.
Typical unit code(s): SEC for seconds
Note: There are unfortunately no standard unit codes for seconds/0..100 km/h or seconds/0..60 mph. Simply use "SEC" for seconds and indicate the velocities in the name of the QuantitativeValue, or use valueReference with a QuantitativeValue of 0..60 mph or 0..100 km/h to specify the reference speeds.
bodyType URL  or
QualitativeValue  or
Text 
Indicates the design and body style of the vehicle (e.g. station wagon, hatchback, etc.).
cargoVolume QuantitativeValue The available volume for cargo or luggage. For automobiles, this is usually the trunk volume.
Typical unit code(s): LTR for liters, FTQ for cubic foot/feet
Note: You can use minValue and maxValue to indicate ranges.
dateVehicleFirstRegistered Date The date of the first registration of the vehicle with the respective public authorities.
driveWheelConfiguration DriveWheelConfigurationValue  or
Text 
The drive wheel configuration, i.e. which roadwheels will receive torque from the vehicle's engine via the drivetrain.
emissionsCO2 Number The CO2 emissions in g/km. The property uses a number instead of a QuantitativeValue, since g/km is the dominant unit of measurement, and there is no UNCEFACT Common Code for g/km.
fuelCapacity QuantitativeValue The capacity of the fuel tank or in the case of electric cars, the battery. If there are multiple components for storage, this should indicate the total of all storage of the same type.
Typical unit code(s): LTR for liters, GLL of US gallons, GLI for UK / imperial gallons, AMH for ampere-hours (for electrical vehicles)
fuelConsumption QuantitativeValue The amount of fuel consumed for traveling a particular distance or temporal duration with the given vehicle (e.g. liters per 100 km).
Note 1: There are unfortunately no standard unit codes for liters per 100 km.
Use unitText to indicate the unit of measurement, e.g. L/100 km. Note 2: There are two ways of indicating the fuel consumption, fuelConsumption (e.g. 8 liters per 100 km) and fuelEfficiency (e.g. 30 miles per gallon). They are reciprocal.
Note 3: Often, the absolute value is useful only when related to driving speed ("at 80 km/h") or usage pattern ("city traffic"). You can use valueReference to link the value for the fuel consumption to another value.
fuelEfficiency QuantitativeValue The distance traveled per unit of fuel used; most commonly miles per gallon (mpg) or kilometers per liter (km/L).
Note 1: There are unfortunately no standard unit codes for miles per gallon or kilometers per liter.
Use unitText to indicate the unit of measurement, e.g. mpg or km/L. Note 2: There are two ways of indicating the fuel consumption, fuelConsumption (e.g. 8 liters per 100 km) and fuelEfficiency (e.g. 30 miles per gallon). They are reciprocal.
Note 3: Often, the absolute value is useful only when related to driving speed ("at 80 km/h") or usage pattern ("city traffic"). You can use valueReference to link the value for the fuel economy to another value.
fuelType URL  or
QualitativeValue  or
Text 
The type of fuel suitable for the engine or engines of the vehicle. If the vehicle has only one engine, this property can be attached directly to the vehicle.
knownVehicleDamages Text A textual description of known damages, both repaired and unrepaired.
meetsEmissionStandard URL  or
QualitativeValue  or
Text 
Indicates that the vehicle meets the respective emission standard.
mileageFromOdometer QuantitativeValue The total distance travelled by the particular vehicle since its initial production, as read from its odometer.
Typical unit code(s): KMT for kilometers, SMI for statute miles
modelDate Date The release date of a vehicle model (often used to differentiate versions of the same make and model).
numberOfAirbags Number  or
Text 
The number or type of airbags in the vehicle.
numberOfAxles Number  or
QuantitativeValue 
The number of axles.
Typical unit code(s): C62
numberOfDoors Number  or
QuantitativeValue 
The number of doors.
Typical unit code(s): C62
numberOfForwardGears Number  or
QuantitativeValue 
The total number of forward gears available for the transmission system of the vehicle.
Typical unit code(s): C62
numberOfPreviousOwners Number  or
QuantitativeValue 
The number of owners of the vehicle, including the current one.
Typical unit code(s): C62
payload QuantitativeValue The permitted weight of passengers and cargo, EXCLUDING the weight of the empty vehicle.
Typical unit code(s): KGM for kilogram, LBR for pound
Note 1: Many databases specify the permitted TOTAL weight instead, which is the sum of weight and payload.
Note 2: You can indicate additional information in the name of the QuantitativeValue node.
Note 3: You may also link to a QualitativeValue node that provides additional information using valueReference.
Note 4: Note that you can use minValue and maxValue to indicate ranges.
productionDate Date The date of production of the item, e.g. vehicle.
purchaseDate Date The date the item e.g. vehicle was purchased by the current owner.
seatingCapacity Number  or
QuantitativeValue 
The number of persons that can be seated (e.g. in a vehicle), both in terms of the physical space available, and in terms of limitations set by law.
Typical unit code(s): C62 for persons
specialUsage CarUsageType  or
Text 
Indicates whether the object has been used for special purposes, like vehicles that have been used for commercial rental, driving school, or as a taxi. The legislation in some countries may require this information to be revealed when offering the item for sale.
speed QuantitativeValue The speed range of the vehicle. If the vehicle is powered by an engine, the upper limit of the speed range (indicated by maxValue) should be the maximum speed achievable under regular conditions.
Typical unit code(s): KMH for km/h, HM for mile per hour (0.447 04 m/s), KNT for knot
Note 1: Use minValue and maxValue to indicate the range. Typically, the minimal value is zero.
Note 2: There are many different ways of measuring the speed range. You can link to information about how the given value has been determined using the valueReference property.
steeringPosition SteeringPositionValue The position of the steering wheel or similar device (mostly for cars).
tongueWeight QuantitativeValue The permitted vertical load (TWR) of a trailer attached to the vehicle. Also referred to as Tongue Load Rating (TLR) or Vertical Load Rating (VLR).
Typical unit code(s): KGM for kilogram, LBR for pound
Note 1: You can indicate additional information in the name of the QuantitativeValue node.
Note 2: You may also link to a QualitativeValue node that provides additional information using valueReference.
Note 3: Note that you can use minValue and maxValue to indicate ranges.
trailerWeight QuantitativeValue The permitted weight of a trailer attached to the vehicle.
Typical unit code(s): KGM for kilogram, LBR for pound
Note 1: You can indicate additional information in the name of the QuantitativeValue node.
Note 2: You may also link to a QualitativeValue node that provides additional information using valueReference.
Note 3: Note that you can use minValue and maxValue to indicate ranges.
vehicleConfiguration Text A short text indicating the configuration of the vehicle, e.g. '5dr hatchback ST 2.5 MT 225 hp' or 'limited edition'.
vehicleEngine EngineSpecification Information about the engine or engines of the vehicle.
vehicleIdentificationNumber Text The Vehicle Identification Number (VIN) is a unique serial number used by the automotive industry to identify individual motor vehicles.
vehicleInteriorColor Text The color or color combination of the interior of the vehicle.
vehicleInteriorType Text The type or material of the interior of the vehicle (e.g. synthetic fabric, leather, wood, etc.). While most interior types are characterized by the material used, an interior type can also be based on vehicle usage or target audience.
vehicleModelDate Date The release date of a vehicle model (often used to differentiate versions of the same make and model).
vehicleSeatingCapacity Number  or
QuantitativeValue 
The number of passengers that can be seated in the vehicle, both in terms of the physical space available, and in terms of limitations set by law.
Typical unit code(s): C62 for persons
vehicleTransmission URL  or
QualitativeValue  or
Text 
The type of component used for transmitting the power from a rotating power source to the wheels or other relevant component(s) ("gearbox" for cars).
weightTotal QuantitativeValue The permitted total weight of the loaded vehicle, including passengers and cargo and the weight of the empty vehicle.
Typical unit code(s): KGM for kilogram, LBR for pound
Note 1: You can indicate additional information in the name of the QuantitativeValue node.
Note 2: You may also link to a QualitativeValue node that provides additional information using valueReference.
Note 3: Note that you can use minValue and maxValue to indicate ranges.
wheelbase QuantitativeValue The distance between the centers of the front and rear wheels.
Typical unit code(s): CMT for centimeters, MTR for meters, INH for inches, FOT for foot/feet
Properties from Product
additionalProperty PropertyValue A property-value pair representing an additional characteristics of the entitity, e.g. a product feature or another characteristic for which there is no matching property in schema.org.

Note: Publishers should be aware that applications designed to use specific schema.org properties (e.g. http://schema.org/width, http://schema.org/color, http://schema.org/gtin13, ...) will typically expect such data to be provided using those properties, rather than using the generic property/value mechanism.
aggregateRating AggregateRating The overall rating, based on a collection of reviews or ratings, of the item.
audience Audience An intended audience, i.e. a group for whom something was created. Supersedes serviceAudience.
award Text An award won by or for this item. Supersedes awards.
brand Brand  or
Organization 
The brand(s) associated with a product or service, or the brand(s) maintained by an organization or business person.
category PhysicalActivityCategory  or
Thing  or
Text 
A category for the item. Greater signs or slashes can be used to informally indicate a category hierarchy.
color Text The color of the product.
depth Distance  or
QuantitativeValue 
The depth of the item.
gtin12 Text The GTIN-12 code of the product, or the product to which the offer refers. The GTIN-12 is the 12-digit GS1 Identification Key composed of a U.P.C. Company Prefix, Item Reference, and Check Digit used to identify trade items. See GS1 GTIN Summary for more details.
gtin13 Text The GTIN-13 code of the product, or the product to which the offer refers. This is equivalent to 13-digit ISBN codes and EAN UCC-13. Former 12-digit UPC codes can be converted into a GTIN-13 code by simply adding a preceeding zero. See GS1 GTIN Summary for more details.
gtin14 Text The GTIN-14 code of the product, or the product to which the offer refers. See GS1 GTIN Summary for more details.
gtin8 Text The GTIN-8 code of the product, or the product to which the offer refers. This code is also known as EAN/UCC-8 or 8-digit EAN. See GS1 GTIN Summary for more details.
height Distance  or
QuantitativeValue 
The height of the item.
isAccessoryOrSparePartFor Product A pointer to another product (or multiple products) for which this product is an accessory or spare part.
isConsumableFor Product A pointer to another product (or multiple products) for which this product is a consumable.
isRelatedTo Product A pointer to another, somehow related product (or multiple products).
isSimilarTo Product A pointer to another, functionally similar product (or multiple products).
itemCondition OfferItemCondition A predefined value from OfferItemCondition or a textual description of the condition of the product or service, or the products or services included in the offer.
logo URL  or
ImageObject 
An associated logo.
manufacturer Organization The manufacturer of the product.
model Text  or
ProductModel 
The model of the product. Use with the URL of a ProductModel or a textual representation of the model identifier. The URL of the ProductModel can be from an external source. It is recommended to additionally provide strong product identifiers via the gtin8/gtin13/gtin14 and mpn properties.
mpn Text The Manufacturer Part Number (MPN) of the product, or the product to which the offer refers.
offers Offer An offer to provide this item—for example, an offer to sell a product, rent the DVD of a movie, perform a service, or give away tickets to an event.
productID Text The product identifier, such as ISBN. For example: <meta itemprop='productID' content='isbn:123-456-789'/>.
productionDate Date The date of production of the item, e.g. vehicle.
purchaseDate Date The date the item e.g. vehicle was purchased by the current owner.
releaseDate Date The release date of a product or product model. This can be used to distinguish the exact variant of a product.
review Review A review of the item. Supersedes reviews.
sku Text The Stock Keeping Unit (SKU), i.e. a merchant-specific identifier for a product or service, or the product to which the offer refers.
weight QuantitativeValue The weight of the product or person.
width Distance  or
QuantitativeValue 
The width of the item.
Properties from Thing
additionalType URL An additional type for the item, typically used for adding more specific types from external vocabularies in microdata syntax. This is a relationship between something and a class that the thing is in. In RDFa syntax, it is better to use the native RDFa syntax - the 'typeof' attribute - for multiple types. Schema.org tools may have only weaker understanding of extra types, in particular those defined externally.
alternateName Text An alias for the item.
description Text A short description of the item.
image URL  or
ImageObject 
An image of the item. This can be a URL or a fully described ImageObject.
mainEntityOfPage URL  or
CreativeWork 
Indicates a page (or other CreativeWork) for which this thing is the main entity being described.

See background notes for details.
Inverse property: mainEntity.
name Text The name of the item.
potentialAction Action Indicates a potential Action, which describes an idealized action in which this thing would play an 'object' role.
sameAs URL URL of a reference Web page that unambiguously indicates the item's identity. E.g. the URL of the item's Wikipedia page, Freebase page, or official website.
url URL URL of the item.

Acknowledgements

This element is based on the work of the Automotive Ontology Working Group, see http://www.automotive-ontology.org for details. Many class and property definitions are inspired by or based on abstracts from Wikipedia, the free encyclopedia.

Schema Version 2.2